Common problem-大理石_抛光砖_仿古砖_嘉柏年瓷砖
Current Position: HOME>Service>Common problem

TILES OFTEN ENCOUNTER ANY PROBLEMS

For home life, the feedback of the daily problems of tiles increasingly people's attention, then the tiles are often encountered problems, how to give the correct solution to these problems, I believe that we are particularly concerned about the points. Below, Xiao Bian summary of the relevant issues, and given the handling of the initiative for the consumer reference.

    

ile color problem

    Tiles appear color, is a common problem of tiles, businesses will use some tiles are some of the color is a good excuse to prevaricate, usually if the tile color is not very serious consumers will default. However, if the problem affects the feelings of consumers, then you must ask the merchant to replace the color of the tile, do not believe that the so-called ceramic tile color is an excuse for normal phenomenon. The reason for the occurrence of color is the production enterprises in the production process which, such as the addition of raw materials, such as the proportion or proportion of inconsistencies. Due to inventory problems caused by the phenomenon of chromatic aberration less, if the color is that the quality of the product there is a problem, this time consumers can request a return or replacement.

    Hollowing up

    With a small hammer gently tapping the plane of the brick body, when you hear bang bang, the more empty voice, that the tiles are empty drum phenomenon, wall hollowing may cause off, bring security risks, and tiles hollowing Will lead to arched from the arch, damage beautiful. For the different area of the hollow, we can do differentiated processing.

    Corner empty drums

    If the edge of the tile appears to be hollowed out, the edge of the hollow part of the water can be treated (the gap between the tiles with a small shovel to break open, and then the cement watered into the gap, the hollow will automatically suck into the irrigation Full irrigation finished solidification), to avoid the overall replacement.

    Partial hollowing

    Wall tiles appear a small amount of local hollow, such as without affecting the cabinets, mirror cabinets, showers and water heaters and other furniture, home appliances installed in a stable case, can not be handled, but if the installation and daily life, This part of the tiles knocked back again.

    2/3 area empty drums

    It is recommended to remove the re-paving, then paving the use of adhesives is particularly important, if the tile area is small, you can use benefits clay, it is more adhesive than cement; single tile paste in a flat plane, you can use tile , Tile adhesive, if a small area of the number of tiles, it is recommended to use glue than cement is more appropriate.

    Will be tiled paving tiles and other problems found in the situation, in a state of imminent fall to the general attributable to the two reasons, on the one hand is the decoration workers cut corners due to the other hand, the quality of the tile itself is a problem. Consumers can first find the decoration company, business to the scene to identify, if there is inconsistent situation can apply for third-party agencies, such as looking for consumer associations to coordinate.


   

   ile color problem

    Tiles appear color, is a common problem of tiles, businesses will use some tiles are some of the color is a good excuse to prevaricate, usually if the tile color is not very serious consumers will default. However, if the problem affects the feelings of consumers, then you must ask the merchant to replace the color of the tile, do not believe that the so-called ceramic tile color is an excuse for normal phenomenon. The reason for the occurrence of color is the production enterprises in the production process which, such as the addition of raw materials, such as the proportion or proportion of inconsistencies. Due to inventory problems caused by the phenomenon of chromatic aberration less, if the color is that the quality of the product there is a problem, this time consumers can request a return or replacement.

    Hollowing up

    With a small hammer gently tapping the plane of the brick body, when you hear bang bang, the more empty voice, that the tiles are empty drum phenomenon, wall hollowing may cause off, bring security risks, and tiles hollowing Will lead to arched from the arch, damage beautiful. For the different area of the hollow, we can do differentiated processing.

    Corner empty drums

    If the edge of the tile appears to be hollowed out, the edge of the hollow part of the water can be treated (the gap between the tiles with a small shovel to break open, and then the cement watered into the gap, the hollow will automatically suck into the irrigation Full irrigation finished solidification), to avoid the overall replacement.

    Partial hollowing

    Wall tiles appear a small amount of local hollow, such as without affecting the cabinets, mirror cabinets, showers and water heaters and other furniture, home appliances installed in a stable case, can not be handled, but if the installation and daily life, This part of the tiles knocked back again.

    2/3 area empty drums

    It is recommended to remove the re-paving, then paving the use of adhesives is particularly important, if the tile area is small, you can use benefits clay, it is more adhesive than cement; single tile paste in a flat plane, you can use tile , Tile adhesive, if a small area of the number of tiles, it is recommended to use glue than cement is more appropriate.

    Will be tiled paving tiles and other problems found in the situation, in a state of imminent fall to the general attributable to the two reasons, on the one hand is the decoration workers cut corners due to the other hand, the quality of the tile itself is a problem. Consumers can first find the decoration company, business to the scene to identify, if there is inconsistent situation can apply for third-party agencies, such as looking for consumer associations to coordinate.


   

  Hard objects knock bad with toner tonic

    Do not care about hard objects knock on the surface of the tile caused by scratches and the like, if the trouble is not changed or can not find the same style tiles, you can use marble glue curing agent, with toner into close to the color, fill To porcelain surface vacancies, hardened after polishing, but this approach may lead to different degrees of color problems.

    Brick cracks are recommended to be bored separately

    If the brick is damaged to serious cracks, it is recommended not to replace the old brick directly, when the brick to be careful, it is recommended that professional workers, and then stick a piece of the same brick, so the best results.

    Attention to the base surface to pay attention to moisture

    Used to paste the hook people know that to clean up the paste surface in order to make sticky hook sticky force more durable, repair off the tiles is also to pay attention to the contact surface of the exposed clean work, clear dust; Before the bubble is to spend the water, repair tiles can be watered in its water, to ensure the good adhesion.

    Evenly spread and need to close edge

    Whether it is the use of cement or special ceramic tile, the brush must be full and uniform, pay attention to the level between the adjacent tiles, right angle, to maintain the formation of the final check the color, pattern is consistent, and the tile surface clean, The caulking treatment.

    Allow sufficient expansion of the expansion joints

    With rubber hammer hit repair brick body, fully exhaust, to avoid the basin-like depression, resulting in tile hollowing; the other if it is a large number of tiles replacement, paving should be reserved 2-5mm expansion joints.


   

  Glazed brick wall in the drum, local glazed tiles off

    Phenomenon: knocking on the wall empty, and some even fall off.

     Measures:

     1, according to the provisions of the grass-roots treatment, watering wet walls.

     2, glazed tile before the laying of the surface to remove the soil, soaked in water, placed dry.

     3, posture anytime, anywhere corrective, is strictly prohibited after the correction of mortar water.

     4, inlaid paste, each piece of glazed tile plaster evenly, the amount of paste should not be knocked after.

     5, after the paste in time to clean up the wall. The caulking must be dense.

  Glazed tile crack

 Phenomenon: glazed tile attached to the wall cracks.

     Measures:

     1, choose a good quality glazed tiles on the back to see the material fine, and water absorption is less than 18%.

     2, paste the water before soaking glazed tiles, there will be hidden pick out. Do not hit the brick surface in the construction, to prevent the occurrence of hidden injuries.

     3, cement mortar can not be too thick or too thin.


    

   The surface is not flat, the seam is not straight

    Phenomenon: glazed tiles wall uneven, seams are not straight, uneven joints.

     Measures:

     1, buy good quality glazed tiles. Before the construction of glazed tile standard production of wooden frame for the selection of standard size, greater than the standard size, less than the standard size of three separate, the same type of brick used in a wall.

     2, do a good job of gray cake, looking for the standard work, and glazed tile pre-row.

     3, each posted a line of glazed tiles, in time with a ruler correction, leveling. To avoid the deviation in the mortar after the water to move.



点击关闭
  • Ms Ivy
X

Request for quotation

Please select the product line

Please enter your email address

看不清楚?点击图片换一张